Site Directory

Home to Marble Fireplace Stone Column Marble Fountain Stone Vanity Medallion and More

Home

Wholesale Marble Fireplace Stone Column Marble Fountain Stone Vanity Medallion and More

Dealer

Email

 

marble fireplace column fountain forum

Stone Blogs

marble fireplace stone column travertine fountain

Support

marble fireplace travertine fountain limestone columns granite countertop tiles

marble fireplace travertine fountain limestone columns granite countertop tiles

home to marble fireplace marble fountain marble column granite countertop and more

 

Product

Contact

Material

Project

Online Store

Catalog

Non-stone Product

Marble Fireplace
Stone Column
Stone Gazebo
Stone Fountain
Marble Ball
Stone Vase
Stone Planter
Marble Table
Stone Bench
Marble Doorway
Marble Abstract
Marble Statue
Marble Animals
Stone Medallion
Marble Mosaic
Stone Vanity
Stone Sink
Stone Bathtub
Countertop
Stone Balustrade
Special Shapes
Stone Window sill
Stone Garden Decor
Marble Granite Slab
Marble Blank - Granite Blank
Stone Flooring
Slate Roofing
Slate Wall and Floor
Landscape Stone
Marble Engraving
Stone Relief
Marble Onyx Urn
Granite Monument

Stone Resources

Custom Search

Friendly Links:

Marble Carving   Stone

China Business  

China Travel Guide  

 

Resources

 

Stone Info

Industry News

Press Release

 

About Amlink

 
 

Stone Resource, Support and Information

 

Shower Wall Cleaning Guide and Tips

 

Cleaning Stone Shower Walls - Recommended Daily to Weekly

Dry/Dust mop the floor at least twice per week.

Add two ounces of commercial marble into a clean bucket of water.

(Be sure that the bucket has been thoroughly cleaned out if it has been used before with another cleaner.)

Using a clean rayon sponge, gently apply the Marbalex on to the surface without making large puddles.

Let the surface dry. There is no rinsing required.

Cleaning Tile & Grout Shower Walls: (Daily-Weekly)

Remove all abrasive debris from the floor surface. Mix 1-2 ounces of good ceramic cleaner per gallon of warm water. With a clean bucket and clean rayon or sponge mop, apply the Ceramiclean to the surface. Let the solution dry. Rinsing is only required for heavily soiled surfaces

Sealing: (Every 1-2 years)

Surface must be dry for 6-12 Hours. Cover surrounding areas that are not intended to be sealed. Liberally spray the surface until it is wet. When the surface begins to dry within 3-5 minutes, wet the surface again with the sealer. After 30 minutes, wipe off any excess sealer with a clean and dry white terry cloth or towel.

Polishing & Enriching Color: (Monthly)

Shake the bottle before using and apply the polish to the stone surface with a clean, dry and white terry cloth towel. Let the polish dry to a haze for 2 minutes. Wipe off the haze with a clean, dry and white terry cloth towel. * Do not use on floors.

Disinfecting: (Weekly)

Simply spray Counterrific on to the surface and let it stay wet for five minutes. Wipe off with a clean and dry paper towel. If any streaks appear, simply spray again and wipe off immediately.

Restoring the Color of Grout: (As Needed)

Ensure surface is free from grease, dirt and other contaminants. Shake well with cap on before use. Remove cap, and then press pen down vertically for a minute until you see the ink starting to flow. Apply two (2) coats an hour apart. Replace cap when not in use. * If grout is dirty, clean with SCI's Ceramiclean® before using the Grout Ink. * 4. Note: Ink colors may appear slightly different from the color of the pen caps.

 
 

Sealing: (Every 1-2 years)

Surface must be dry for 6-12 Hours. Cover surrounding areas that are not intended to be sealed. Liberally spray the surface until it is wet. When the surface begins to dry within 3-5 minutes, wet the surface again with the sealer. After 30 minutes, wipe off any excess sealer with a clean and dry white terry cloth or towel.

Polishing & Enriching Color: (Monthly)

Shake the bottle before using and apply the polish to the stone surface with a clean, dry and white terry cloth towel. Let the polish dry to a haze for 2 minutes. Wipe off the haze with a clean, dry and white terry cloth towel. * Do not use on floors.

Disinfecting: (Weekly)

Simply spray Counterrific on to the surface and let it stay wet for five minutes. Wipe off with a clean and dry paper towel. If any streaks appear, simply spray again and wipe off immediately.

Restoring the Color of Grout: (As Needed)

Ensure surface is free from grease, dirt and other contaminants. Shake well with cap on before use. Remove cap, and then press pen down vertically for a minute until you see the ink starting to flow. Apply two (2) coats an hour apart. Replace cap when not in use. * If grout is dirty, clean with SCI's Ceramiclean® before using the Grout Ink. * 4. Note: Ink colors may appear slightly different from the color of the pen caps.

 
 
 

Resources

 

Stone Info

Industry News

Press Release

 

About Amlink